IQaudIO Pi-DigiAMP+ RPi2/RPi3 Compatible
With the IQaudIO Pi-DigiAMP+, no soldering is required, simply “fit and enjoy.” This is a combined DAC and AMP solution in one device. Full-HD stereo (up to 2x35w) solution for the Raspberry Pi (A+/B+/2/3), complete with PCB spacers and screws.
Designed to deliver the best audio performance from the Raspberry Pi A+/B+/RPi2/3, fit within the Pi’s form factor and provide additional access to several of the Pi’s 40way I/O signals allowing easy addition of IR sensors, Rotary Encoder or i2c devices (such as OLED screens) etc.
The Pi-DigiAMP+ takes everything we’ve learned from the previous Pi-AMP+ and Pi-DAC+ combination, shrinks it down and reduced the overall system cost by around £25!
We have used the latest Texas Instruments chipset (TAS5756m) to deliver awesome performance from a single HAT board. As with our other products you can be assured that the Linux driver support is already built-in to Raspbian Linux (using the same device drivers as the Pi-DAC+) and supported by the many software audio packages already on the market. RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC and others. The IQaudIO Pi-DigiAMP+ easily supports 24-bit / 192kHz file formats but is equally at home with lower quality MP3s bringing your music alive sonically.
Please note that The Pi-DigiAMP+ uses GPIO22 as amp-mute and when powered on is in mute state, examples are in the user docs and many software releases already support the Pi-AMP+ in the same way.
The IQaudIO Pi-DigiAMP+ connects easily to the Raspberry Pi and provides up to 2 x 35W stereo output to speakers.
- HAT compliant accessory; EEPROM, mounting holes
- Full-HD audio – up to 24-bit/192kHz playback
- Up to 2x35w of crystal clear amplification
- No soldering required to your Raspberry Pi
- Integrated hardware volume control (via ALSA)
- Powers the Raspberry Pi from the Pi-DigiAMP+ power input
- Linux driver support already delivered within Raspbian
- AMP can be enabled / disabled via Raspberry Pi’s GPIO22
- Advanced ESD protection
- Uses the digital I2S audio signals to reduce CPU load over USB audio solutions
- Fully built and tested Raspberry Pi accessory
- Designed and manufactured in the UK
The IQaudIO Pi-DigiAMP+ is suitable for the latest Raspbery Pi A+/B+, RPi2 AND RPi3 it is not compatible with much older Raspberry Pi A and B Models.
The Pi-DigiAMP+ is supplied with all mounting hardware.
NOTE: The Pi-DigiAMP+ requires an external power supply / brick, and when powered the Pi-DigiAMP+ provides power to your Raspberry Pi in parallel. We recommend and sell the XP Power 19v supply (for 2x35w).
If you intend to mount your Pi / Pi-DigiAMP+ on the official 7" screen then you'll need to also buy the extra spacer pack.
Comment on this product
Just so you know; all our prices include GST, orders over $100.00 qualify for free shipping. Everything that is in stock (green tick icon) ships overnight on CourierPost. A lot of things that have the "blue question mark" stock icon are actually available now direct from our suppliers, please feel free to ask us if you aren't sure.
All our products are sourced through official channels, and come with a manufacturers warranty. Here's our returns policy if you'd like to read it before purchasing.