UART TTL to RS485 Two-way Converter Module

$10.00 Inc. GST

This is the UART TTL to RS485 Two-way Converter Module from Haoyu Electronics. The module is fully consider the 485 mine design and anti-jamming design, in the field for long distance transmission, it will block the "earthed" side to earth, can play the role of a good anti-jamming and lightning protection, make 485 more secure; you can not connect with the earth indoor short-distance transmission. Using a standard 2.54 pitch design for easy secondary development. Having a 120 ohm termination resistors that shorted R0 to enable matching resistor, when long-distance transmission is recommended shorting. Support multi-machine communication, allowing access at up to 128 devices on the bus. The module can be hot-swappable, hot-swap does not appears dead bolt phenomenon that occur to other 485 chips. A large area of copper to prevent signal interference.

Features

  • 3.3V perfectly compatible with 5.0V power supply
  • 3.3V and 5.0V signal perfectly compatible
  • Working temperature range: -40°C to + 85°C
  • Transmission distance up to kilometers (with 850 meters of 2 * 1.5 cable to do the test, it is recommended to use in the 800 meters, more than 800 meters, please add repeaters)
  • Semi-hole process design, the thickness of 0.8mm, makes it easy to use as a combo board, it can also be welded terminal use
  • Has RXD, TXD signal lights to observe send and receive status
0 comments on "UART TTL to RS485 Two-way Converter Module"

Comment on this product

Just so you know; all our prices include GST, orders over $100.00 qualify for free shipping. Everything that is in stock (green tick icon) ships overnight on CourierPost. A lot of things that have the "blue question mark" stock icon are actually available now direct from our suppliers, please feel free to ask us if you aren't sure.

All our products are sourced through official channels, and come with a manufacturers warranty. Here's our returns policy if you'd like to read it before purchasing.