Waterproof Metal Pushbutton with Orange LED Ring - 16mm Momentary Stainless, 6V LED

$10.00 Inc. GST
25 Available Now
(More Available Soon)

These stainless steel metal buttons are rugged and waterproof and look really good. Simply drill a 16mm hole into any material up to 10mm thick and you can fit these in place, there's even a rubber gasket to keep any water out of the enclosure.

On the front of the button is a slightly raised metal actuator, surrounded by a orange plastic LED ring. We find the raised version better for tactile feel than the flat version. On the back there are 3 contacts for the button (common, normally-open and normally-closed) and 2 for the orange LED ring (+ and -). Connect 3 to 6V to the LED to have it light up nicely, there's a built in resistor. If you want to use this with a higher voltage, say 12V or 24V, simply add a 470 ohm resistor in series with the LED connection to keep the LED current at around 20mA.

This button is a momentary push button, when you press it the 'normally-open' contact shorts to the common contact. When you release it, the contacts open up again.

The switch and LED are separated, so you could wire it to turn on when pressed or vice versa or whatever you wish! Check the specifications for more information!

Specifications

  • Drill hole diameter: 16mm
  • Switch rating: 3A / 250VDC
  • Switch contacts: 1 NO, 1 NC
  • Material: Stainless steel button, chrome plated brass outer
  • Grade: IP40/IP67
  • Contact resistance: < 50 mOhm
  • Insulation resistance: > 1000 Mohm
  • Temperature: -20 C to +55 C
  • Mechanical life: > 1,000,000
  • Electrical life: > 50,000
  • Panel thickness: 1-10mm
  • Operating pressure: 2.5 - 4 N
  • Operating stroke: 2.8mm
  • Lamp rated voltage: 6V
0 comments on "Waterproof Metal Pushbutton with Orange LED Ring - 16mm Momentary"

Comment on this product

Just so you know; all our prices include GST, orders over $100.00 qualify for free shipping. Everything that is in stock (green tick icon) ships overnight on CourierPost. A lot of things that have the "blue question mark" stock icon are actually available now direct from our suppliers, please feel free to ask us if you aren't sure.

All our products are sourced through official channels, and come with a manufacturers warranty. Here's our returns policy if you'd like to read it before purchasing.