WorldxChange Xnet VFX
We had a couple of customers lately enquiring about using various devices with WorldxChange's Xnet VFX VoIP service.
Unlike other providers, WorldxChange suggest using only Linksys VoIP equipment which they will automatically provision and lock down for you. You can however choose to go with their unsupported "OpenVFX" service if you would like to use your own device.
First I tested the Yealink IP Phones with OpenVFX and these worked great.
Next I tested the ATCOM phone systems, these don't work out of the box. I loaded up the Switchfin firmware which worked with some minor modifications to handle the separate authentication username. These modifications have now been included in the Switchfin firmware for everyone to use.
Finally I tested with our local FreeSWITCH install, this worked fine with a few minor tweaks to the dialplan for outgoing calls like so;
<action application="bridge" data="{sip_contact_user=3746xxxx,sip_cid_type=none}sofia/gateway/pan.wxnz.net/$1"/>
We don't use WorldxChange's service ourselves so can't comment further other than the fact that it works in our limited testing.
Maybe you could look at setting up an FTP site for alternative ATCOM IP0x builds?
We have provided a few builds of Switchfin for people. If you let me know what model you want to compile for and any specific options I will see if I can organise it for you.
Cheers,
hads
Thankyou!
That's correct.
Cheers,
Hadley
You're right, SwitchFin is ancient news these days. I've not used WxC apart from this small test so I'm not sure how much help I can be there sorry.
Cheers,
Hadley